Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Seat from a Hyundai i30

Model: Hyundai I30 MK 3, PD - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Seat

See other generations:
Video tutorial

To remove the seat from a 2018 Hyundai i30, open the door on the desired side, slide the seat fully back, and locate the front bolts fixed to the tracks on the floor. Unscrew them with an appropriate spanner.

Next, slide the seat fully forward to access the rear bolts and remove them. Tilt the backrest for more space and slightly lift the seat to access the electrical connectors underneath the base.

Disconnect the wiring by pressing the locking tabs. At this point, grasp the seat with both hands and lift it out of the cabin through the door.


Posted on 14 September 2026 by ScegliAuto


Related tutorials

How to Remove the Front Seats on a Hyundai i30?
How to Remove the Front Seats on a Hyundai i30?
Hyundai I30 (2007-2012 / MK 1, FD) In this tutorial, you will learn how to remove the front seats on a Hyundai i30, a very simple and quick operation. Before proceeding, open the bonne…
Where to Find the OBD Port on a Hyundai i30 2012
Where to Find the OBD Port on a Hyundai i30 2012
Hyundai I30 (2011-2016 / GD, MK 2) To locate the OBD port on your Hyundai i30, follow these simple steps. First, get into the car and sit in the driver's seat. Ensure the vehicle is co…
Where to Find the OBD Port of the Hyundai i30
Where to Find the OBD Port of the Hyundai i30
Hyundai I30 (2016-2024 / MK 3, PD) If you own a 2021 Hyundai i30 and want to find the OBD port to connect a professional diagnostic tool, read the following instructions carefully and …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos