Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Headlight and Replacing Bulbs on a Hyundai i30

Model: Hyundai I30 MK 3, PD - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Headlight

See other generations:
Video tutorial

When one of the bulbs in the front headlight of the Hyundai i30 burns out, it is advisable to remove the headlight from its housing for easier replacement. To do this, open the bonnet and position yourself in front of the headlight you need to work on. Use a 10mm socket to remove the three screws above the headlight, then use a cross screwdriver to remove the screw located in the wheel arch, at the back of the headlight.

Now unscrew the last bolt at the bottom, inside the engine bay, disconnect the electrical connector, and you can pull the headlight from its housing. You can now easily replace the burnt-out bulbs.


Updated on 20 September 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Headlamp Bulb on a Hyundai i30?
How to Replace the Rear Headlamp Bulb on a Hyundai i30?
Hyundai I30 (2011-2016 / GD, MK 2) To replace the bulbs in the rear light unit of the Hyundai i30, open the boot and remove the side cover corresponding to the light. You can then extr…
How to Replace the Rear Headlight Bulb on the Hyundai i30?
How to Replace the Rear Headlight Bulb on the Hyundai i30?
Hyundai I30 (2011-2016 / GD, MK 2) To replace the bulbs in the rear light cluster of the Hyundai i30, open the tailgate and remove the inner side cover corresponding to the light. Here…
Replacing the Rear Light Bulb on the Hyundai i30
Replacing the Rear Light Bulb on the Hyundai i30
Hyundai I30 (2016-2024 / MK 3, PD) If one of the rear light bulbs on the Hyundai i30 blows, it is important for our safety to change it as soon as possible. Open the boot and unscrew t…

Other guides you may be interested in

    Frequently Asked Questions

    • I30 2011-2016 - How do I replace the front bulb on the Hyundai I30? Read answer

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos