Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Hyundai
  4. :
  5. I30
  6. : Headlight

Hyundai I30 - Headlight

Hyundai I30 (2011-2016 / MK 2, GD)
How to remove the left front headlight of the Hyundai I30

Today we will explain the steps to remove the left front headlight of the Hyundai I30. The first step is to open the front hood, pulling the lever near the …read all…
Posted on 25 March 2024 by ScegliAuto
Hyundai I30 (2016-2023 / PD, MK 3)
Disassembly of the front headlight and replacement of the bulbs of the Hyundai I30

When one of the front headlight bulbs of the Hyundai I30 burns out, it is recommended to remove it from its housing for easier replacement. To do this, open …read all…
Posted on 25 March 2024 by ScegliAuto
Hyundai I30 (2007-2012 / FD, MK 1)
How do you remove the front headlight of the Hyundai I30?

In order to remove the front headlight of the Hyundai I30, you need to open the hood so that you have access to the screws that secure the bumper from the top. …read all…
Posted on 22 March 2024 by ScegliAuto
Hyundai I30 (2011-2016 / MK 2, GD)
Replacing the side light bulb (arrow) on the Hyundai I30

To be able to replace the side turn signal light bulb of the car, proceed as follows: open the bonnet, locate the headlight with the bulb to be replaced and …read all…
Posted on 11 November 2022 by ScegliAuto

Airbags (2) Loudspeaker (1) Car stereo (2) Battery (5) Spark plugs (1) Bodywork (1) Key (6) Timing belt (1) -board computer (3) Checks and maintenance (26) Dashboard (1) Gearshift gaiter (1) Headlight (4) Tail light (2) Fog lights (1) Air filter (2) Cabin air filter (2) Hand brake (2) Window lift switch (1) Light bulb (3) Headlight bulb (6) Rear light bulb (2) Interior lights ceiling light bulb (1) License plate light (1) Window motor (2) Gear oil (1) Door panel (1) Front bumper (1) Brake pads (1) Gear Shift Knob (2) Instrument cluster (10) Passenger compartment heating radiator (1) Fuse box (5) Seat (1) Outside rearview mirror (6) Manufacturer's coat of arms (1) Windscreen wipers (1) Central tunnel (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos