Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Side Light Bulb (Indicator) on the Hyundai i30

Model: Hyundai I30 GD, MK 2 - Years: 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight

See other generations:
Video tutorial

To replace the side indicator bulb on your vehicle, follow these steps: open the bonnet, locate the headlamp with the bulb to be replaced, and remove the screws on top of the headlamp unit. To facilitate the removal of the headlamp, also loosen the upper fixing screw of the wing.

Pull the headlamp towards you and disconnect the rear power connector. On the outer side of the headlamp, there is a plastic cover that needs to be removed to access the indicator bulb.

Replace the bulb and close the compartment. Finally, refit all components in reverse order to complete the job.


Updated on 24 June 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Timing Belt on the Hyundai i30 2.0
Guide to Replacing the Timing Belt on the Hyundai i30 2.0
Hyundai I30 (2007-2012 / MK 1, FD) This guide provides instructions for removing and replacing the timing belt on the Hyundai i30 2.0. For this engine type, the timing belt should be r…
Guide to Replace the Heating Radiator on the Hyundai I30
Guide to Replace the Heating Radiator on the Hyundai I30
Hyundai I30 (2007-2012 / MK 1, FD) In this guide, discover the main instructions on how to remove and replace the internal heating radiator of the cabin on the first series Hyundai I30…
How do you remove the headlight of the Hyundai I30?
How do you remove the headlight of the Hyundai I30?
Hyundai I30 (2007-2012 / MK 1, FD) We dismantle the rear light of the Hyundai I30, easily and quickly. The video uploaded here provides clear and very useful support, so let's proceed:…

    Frequently Asked Questions

    • I30 2011-2016 - How do I replace the front bulb on the Hyundai I30? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos