Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Timing Belt on the Hyundai i30 2.0

Model: Hyundai I30 FD, MK 1 - Years 2007-2012
Part: Timing belt

This guide provides instructions for removing and replacing the timing belt on the Hyundai i30 2.0. For this engine type, the timing belt should be replaced every 112,000 miles or 10 years, although a visual inspection is recommended at 75,000 miles. Therefore, lift the vehicle and remove the crankshaft pulley, subsequently taking off the V-belt. Then, take the necessary references for replacing the timing belt, following the video tutorial to the end for the replacement!

Updated on 16 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Gearbox Oil on a Hyundai i30
How to Change the Gearbox Oil on a Hyundai i30
Hyundai I30 (2016-2024 / PD, MK 3) This guide outlines the main steps to change the gearbox oil on a Hyundai i30. First, open the bonnet and remove the air filter housing. Then, unscre…
Where to Find the OBD Port of the Hyundai i30
Where to Find the OBD Port of the Hyundai i30
Hyundai I30 (2016-2024 / PD, MK 3) If you own a 2021 Hyundai i30 and want to find the OBD port to connect a professional diagnostic tool, read the following instructions carefully and …
How do you replace the battery of the Hyundai I30 key?
How do you replace the battery of the Hyundai I30 key?
Hyundai I30 (2011-2016 / MK 2, GD) Before commenting on this video guide, we specify that it is valid for various Hyundai cars, not just for the I30. It is quite intuitive to understan…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos