Do it yourself
| ||||
|
Volvo Xc90 - Video tutorial
Model: Volvo Xc90
MK 1
- Years 2002-2014 In order to adjust the handbrake of the Volvo XC90, you need to remove the protective panel on the left side of the center console. This panel can be detached by accessing it through the driver's footwell. Once this panel is removed, you will be able to locate the underlying handbrake cable, which can be adjusted using a specific wrench to tighten or loosen the bolt in this position. At this point, you can make the handbrake tighter or looser.
Posted on 18 September 2023 by ScegliAuto
|
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.016
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |