Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. Xc90
    4. : How do you adjust the handbrake of the Volvo XC90?

Volvo Xc90 - Video tutorial

Model: Volvo Xc90 MK 1 - Years 2002-2014
Part: Hand brake
Operation: How do you adjust the handbrake of the Volvo XC90?

In order to adjust the handbrake of the Volvo XC90, you need to remove the left side panel of the central tunnel, on the driver's side: once this panel has been removed, you will be able to locate the underlying components. Here you will find the handbrake cable, which needs to be adjusted by tightening or loosening the corresponding bolt: tightening it will make the handbrake harder, and vice versa loosening it will make it softer. After the adjustment, you can reposition the panel in its place, making sure that everything is working correctly.


Posted on 9 May 2024 by ScegliAuto



How do you adjust the handbrake of the Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) In order to adjust the handbrake of the Volvo XC90, you need to remove the protective panel on the left side of the center console. This panel can be
How to adjust handbrake in Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) In this tutorial we can see how to adjust the handbrake in Volvo XC90, a very simple operation. First of all, position ourselves on the rear sofa, th
How to adjust the Volvo XC 90 handbrake cable
Volvo Xc90 (2002-2014 / MK 1) Below we will see the steps that will allow us to adjust the handbrake, as well as its cable, of the Volvo XC 90. First of all, we get on board the c

    Frequently Asked Questions

    • Xc90 2015-2025 - What problems can the parking brake of the Volvo XC90 cause? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos