Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Parking Brake on a Volvo XC90?

Model: Volvo Xc90 MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Parking brake

See other generations:
Video tutorial

In this tutorial, you will see how to adjust the parking brake on a Volvo XC90, a very simple operation. First, position yourself in the back seat, then remove the end part of the center console by pulling the lever located in the lower slot.

Next, carefully pry off the indicated panel using a plastic trim tool, unscrew the indicated screws, remove the entire console, and locate the adjuster on the left side. At this point, engage the parking brake, hold the mechanism in place, and adjust the cable length by loosening or tightening the adjuster.


Updated on 30 June 2026 by ScegliAuto


Related tutorials

How to Adjust the Handbrake on the Volvo XC90?
How to Adjust the Handbrake on the Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) To adjust the handbrake on the Volvo XC90, you need to remove the left side protection panel of the center tunnel on the driver's side. Once this pan…
How to Adjust the Parking Brake on a Volvo XC90
How to Adjust the Parking Brake on a Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) .. In this video, you will learn how to adjust the parking brake on a Volvo XC90. The adjustment system for the parking brake is located.. …
How to Adjust the Handbrake on the Volvo XC90
How to Adjust the Handbrake on the Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) To adjust the handbrake, follow these steps: access the cabin from the driver's side. The adjustment cable for the handbrake is located under the mat…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos