Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Locked Door of the Volkswagen Passat

Model: Volkswagen Passat 3BG, B5 - Years 1996-2005
Part: Car door

Video tutorial
Detailed instructions - Below are the steps to open the locked rear door of the Volkswagen Passat. First, get into the vehicle and start by removing the door panel. Take off the plastic cover of the grab handle and unscrew the fixing screws found underneath and on the sides of the panel, as shown in the video. Next, detach and remove the inner panel to access the door lock. Now, disengage the lock to open the door in an emergency, and proceed with the repair or replacement of the lock!

Updated on 16 August 2026 by ScegliAuto


Related tutorials

How to Open the Door with a Flat Battery on a Volkswagen Passat
Volkswagen Passat (2014-2023 / B8, 3G, MK 8) In this video tutorial, you will learn how to open the door of a Volkswagen Passat when the remote battery is flat. To open the door in this emergenc…
How to Remove the Door Panel from a Volkswagen Passat
How to Remove the Door Panel from a Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) Before you can start, open the door of your Volkswagen Passat. Begin by unclipping and removing the insert of the door handle panel, using a thin but…
How to disassemble the opening handle of the Volkswagen Passat
How to disassemble the opening handle of the Volkswagen Passat
Volkswagen Passat (2023-2026 / 3J, B9) To disassemble the opening handle of the Volkswagen Passat B9, open the relevant door and remove the side cover. Insert a flathead screwdriver into t…

Other guides you may be interested in

Where to Find the Fuses in the Nissan Qashqai

The fuse box in the Nissan Qashqai's cabin is located to the left of the steering wheel, where there is a small cover. Pull it off to access the fuse and relay box. To replace a fuse, if that is the cause of the issue, take a small pair of pliers and remove the fuse of the non-functioning component. Check that the bridge inside the fuse is not broken; if it is broken, replace the fuse with a new one of the same amperage as the old one. If the bridge is intact, the fuse is functioning correctly.

Watch the video!


by ScegliAuto

More videos