Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the opening handle of the Volkswagen Passat

Model: Volkswagen Passat 3J, B9 - Years 2023-2026
Part: Handle

To disassemble the opening handle of the Volkswagen Passat B9, open the relevant door and remove the side cover. Insert a flathead screwdriver into the hole and push the internal lever while pulling the handle outward, as if you were opening the door. The handle will detach, allowing you to disconnect it for removal. Reinstallation follows the reverse procedure. This operation is essential not only for handle replacement but also for bodywork tasks such as painting or applying adhesive coverings.

Posted on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Handle on a Passat
How to Remove the Handle on a Passat
Volkswagen Passat (1996-2005 / 3BG, B5) How do you remove the handle on a VW Passat? Here’s how to remove the handle from inside the car door. Remove the seal on the side of the door to acc…
How to Remove the Lock from a Volkswagen Passat
How to Remove the Lock from a Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) Want to remove the lock from a Volkswagen Passat? In this video, we will briefly see how to disassemble it and remove it from the door housing. To re…
Disassembling Door Panel on Volkswagen Passat
Disassembling Door Panel on Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) In this short video tutorial, you will learn how to remove the door panel of a fourth-generation Volkswagen Passat in simple steps. First, open the f…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos