Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to dismantle and replace the external door handle of the Volkswagen Passat

Model: Volkswagen Passat B8, 3G, MK 8 - Years 2014-2023
Part: Handle

In this guide, we will see the instructions that will allow us to disassemble and replace the external handle of the front door of the Volkswagen Passat. First, we open the front door of the car and start pressing on the side hole of the door (next to the handle) to release the rectangular cover; then we subsequently remove the entire external handle of the door, as shown in the video. At this point, we replace and install the new external handle of the door, fixing it correctly; we reassemble the cover and verify its correct operation!

Posted on 12 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the external handle of the front door of the Volkswagen Passat
How to remove the external handle of the front door of the Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) Today we will see the instructions that will allow us to disassemble and replace the external handle of the front door of the Volkswagen Passat. Firs…
How to disassemble the opening handle of the Volkswagen Passat
How to disassemble the opening handle of the Volkswagen Passat
Volkswagen Passat (2023-2026 / 3J, B9) To disassemble the opening handle of the Volkswagen Passat B9, open the relevant door and remove the side cover. Insert a flathead screwdriver into t…
How to Remove the Handle on a Passat
How to Remove the Handle on a Passat
Volkswagen Passat (1996-2005 / 3BG, B5) How do you remove the handle on a VW Passat? Here’s how to remove the handle from inside the car door. Remove the seal on the side of the door to acc…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos