Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the external handle of the front door of the Volkswagen Passat

Model: Volkswagen Passat B7 - Years 2010-2014
Part: Handle

Today we will see the instructions that will allow us to disassemble and replace the external handle of the front door of the Volkswagen Passat. First, we open the front door of the car and start disassembling and removing the lock cylinder; to do this, we unscrew the side screw using a key or torx screwdriver, as shown in the video. At this point, we remove the remaining part of the handle, replacing it with the new one; we install it correctly and reassemble the lock cylinder of the front door, following the video tutorial until the end!

Posted on 16 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to dismantle and replace the external door handle of the Volkswagen Passat
How to dismantle and replace the external door handle of the Volkswagen Passat
Volkswagen Passat (2014-2023 / B8, 3G, MK 8) In this guide, we will see the instructions that will allow us to disassemble and replace the external handle of the front door of the Volkswagen Pas…
How do you remove the external handle of a Volkswagen Passat?
Volkswagen Passat (2010-2014 / B7) In this video we see how to remove the external handle of a Volkswagen Passat: we start with the door open: with an Allen key we enter the hole we fi…
How to remove the external handle on the Volkswagen Passat?
How to remove the external handle on the Volkswagen Passat?
Volkswagen Passat (2014-2023 / B8, 3G, MK 8) In this tutorial, we can see how to remove the external handle on the Volkswagen Passat, an extremely simple and fast operation. First of all, we ope…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos