Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Door Handle of the Volkswagen Passat B6?

Model: Volkswagen Passat B6, 3C - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Handle

See other generations:
Video tutorial

This excellent video guide is useful for anyone needing to remove the door handle of their Volkswagen Passat B6, whether for inspection, repair, or other reasons. Here’s what to do: Use a plastic trim tool to remove the rear cover, then proceed to unscrew the two locking Allen screws located in the door pillar, and finish by grasping the handle and rotating it 90 degrees to the right, releasing it from the internal latch of the door.

Done, the job is completed in no time.


Updated on 18 November 2026 by ScegliAuto


Related tutorials

Volkswagen Passat (1996-2005 / 3BG, B5) How do you remove the handle on a VW Passat? Here’s how to remove the handle from inside the car door. Remove the seal on the side of the door to acc…
Volkswagen Passat (1996-2005 / 3BG, B5) Is the door panel of a VW Passat damaged and needs replacing? Here’s how to remove it from the right door. Remove the switch panel in the internal ha…
Volkswagen Passat (2005-2010 / B6, 3C) Disassembling and repairing the door handle of a Volkswagen Passat B6 is not complicated, but it requires a bit of patience. First, open the door and…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos