Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear seats of the Fiat Tipo

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Seat

In this guide, we will see the main instructions useful for disassembling the rear seats of the Fiat Tipo, removing the bench and, if necessary, the backrests. First, we open the rear doors of the car and start pulling the bench upwards, until it detaches and is removed from the passenger compartment; then we unscrew the screws and bolts found on the base of the backrests, if we want to remove them as well, as shown in the video. At this point, we clean or repair the rear seats, reassembling them and restoring them to their original position, following the video tutorial to the end!

Posted on 30 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear seat of the Fiat Tipo
How to remove the rear seat of the Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) The following steps will show us how to disassemble and replace the rear bench of the Fiat Tipo. First, we open the rear doors of the car and start p…
How to Fold Down the Rear Seat on a Fiat Tipo
How to Fold Down the Rear Seat on a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) To fold down the rear seat on a Fiat Tipo for extra space in the cabin, first press the lever located on the backrest of the seat, move the seat forw…
How to Fold Down the Rear Seats on the Fiat Tipo?
How to Fold Down the Rear Seats on the Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) To fold down the rear seats on the Fiat Tipo, pull the seat bench forward using the lever underneath. Once the seat bench is fully pulled forward, lo…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos