Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the rear seat of the Fiat Tipo

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Rear bench seat

The following steps will show us how to disassemble and replace the rear bench of the Fiat Tipo. First, we open the rear doors of the car and start pulling the rear bench upwards to detach it from the supports on each point of the three seats of the rear bench; then we lift the bench to remove it completely from the cabin. At this point, we proceed with the repair or replacement of the rear bench with the new one, placing it in position and securely fastening all the hooks underneath it.

Posted on 22 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Fiat Tipo (2016-2026 / 356, 357, 358) To fold down the rear seat on a Fiat Tipo for extra space in the cabin, first press the lever located on the backrest of the seat, move the seat forw…
Fiat Tipo (2016-2026 / 356, 357, 358) To fold down the rear seats on the Fiat Tipo, pull the seat bench forward using the lever underneath. Once the seat bench is fully pulled forward, lo…
Fiat Tipo (2016-2026 / 356, 357, 358) Before you start, check and, if necessary, adjust the pressure in the tyres, then sit in the driver's seat of your Fiat Tipo. Start the engine. Next,…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos