Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear light and bulbs of the Fiat Tipo

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Tail light

In this brief and simple guide, you will learn the steps to remove and replace the rear light and its bulbs on the Fiat Tipo. First, open the boot lid and start unscrewing the screws of the light found at the back, removing the plastic cover first; disconnect the electrical connector of the bulbs to remove the rear light, as shown in the video. At this point, remove and replace the bulbs from the light unit, ensuring you use the correct type with the same fitting; then refit the rear light!

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Headlamp Bulb from the Fiat Tipo 356-357
How to Remove the Rear Headlamp Bulb from the Fiat Tipo 356-357
Fiat Tipo (2016-2026 / 356, 357, 358) This guide explains how to remove and replace the bulbs of the rear headlamp on the second series Fiat Tipo, versions 356 and 357. First, open the bo…
How to Replace the Front Headlight Bulbs on Fiat Tipo
How to Replace the Front Headlight Bulbs on Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) How to replace the front headlight bulbs on a Fiat Tipo? Prepare to remove the plastic cover at the bottom of the bumper using a suitable screwdriver…
How to Remove the Rear Lights on the Fiat Tipo 356
How to Remove the Rear Lights on the Fiat Tipo 356
Fiat Tipo (2016-2026 / 356, 357, 358) In this video, you will learn how to remove the rear lights from a 2017 Fiat Tipo 356. First, move to the rear and open the boot lid; then remove the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos