Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Number Plate Light on a Fiat Tipo

Model: Fiat Tipo 358, 356, 357 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: License plate light

See other generations:
Video tutorial

Learn how to remove the number plate light on a Fiat Tipo to replace the bulb. Use a screwdriver or plastic lever to remove the number plate light located in the rear bumper of the car. Once the light is removed, pull out the bulb holder by hand, then disconnect the bulb from it. Fit the new LED/bulb (same size and voltage) into the bulb holder, then refit the light into the body of the boot, pressing until the clips lock automatically.

Test the operation of the previously fitted bulb.


Updated on 7 March 2026 by ScegliAuto


Related tutorials

How to Replace the Interior Light Bulb in the Fiat Tipo?
How to Replace the Interior Light Bulb in the Fiat Tipo?
Fiat Tipo (2016-2026 / 358, 356, 357) To replace the interior light bulb in the Fiat Tipo, detach the ceiling light located inside the cabin, above the rear seats. Once the ceiling light …
How to Replace Damaged Number Plate Bulbs on a Fiat Tipo
How to Replace Damaged Number Plate Bulbs on a Fiat Tipo
Fiat Tipo (2016-2026 / 358, 356, 357) Learn how to replace the damaged number plate bulbs on a Fiat Tipo. Using a screwdriver or plastic lever, remove the number plate light fitting locat…
Replacing the Interior Lights of the Fiat Tipo
Replacing the Interior Lights of the Fiat Tipo
Fiat Tipo (2016-2026 / 358, 356, 357) In this video tutorial, you will find instructions to remove and replace the interior lights of the Fiat Tipo. First, get inside the vehicle and star…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos