Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Damaged Number Plate Bulbs on a Fiat Tipo

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: License plate light

Learn how to replace the damaged number plate bulbs on a Fiat Tipo. Using a screwdriver or plastic lever, remove the number plate light fitting located in the rear bumper of the car (there are two fittings). Once the light fitting is removed, extract the bulb holder by hand, then disconnect the bulb from it. Fit the new LED bulb (same size and voltage) into the bulb holder, then reassemble the light fitting into the tailgate metalwork, pressing until the metal clips lock automatically. Finally, test the correct operation of the previously installed bulbs.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Number Plate Lights on the Fiat Tipo
How to Replace the Number Plate Lights on the Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) Let’s discover in this short and simple guide how to remove and replace the number plate bulbs on the Fiat Tipo. First, move to the rear of the vehic…
How to Remove the Number Plate Light on a Fiat Tipo
How to Remove the Number Plate Light on a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) Learn how to remove the number plate light on a Fiat Tipo to replace the bulb. Use a screwdriver or plastic lever to remove the number plate light lo…
How to remove the rear light and bulbs of the Fiat Tipo
How to remove the rear light and bulbs of the Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) In this brief and simple guide, you will learn the steps to remove and replace the rear light and its bulbs on the Fiat Tipo. First, open the boot li…

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos