Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Lights on the Fiat Tipo

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: License plate light

Let’s discover in this short and simple guide how to remove and replace the number plate bulbs on the Fiat Tipo. First, move to the rear of the vehicle and start by removing the number plate light housings to access the bulbs. Next, disconnect the small bulb from the electrical connector, as shown in the video. Now, replace the bulb with a new one, ensuring it is fitted correctly (in this case, a new LED lamp is installed); then proceed to replace the other bulb!

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Number Plate Light on a Fiat Tipo
How to Remove the Number Plate Light on a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) Learn how to remove the number plate light on a Fiat Tipo to replace the bulb. Use a screwdriver or plastic lever to remove the number plate light lo…
How to Replace Damaged Number Plate Bulbs on a Fiat Tipo
How to Replace Damaged Number Plate Bulbs on a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) Learn how to replace the damaged number plate bulbs on a Fiat Tipo. Using a screwdriver or plastic lever, remove the number plate light fitting locat…
Replacement of the interior lights of the Fiat Tipo
Replacement of the interior lights of the Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) In this video tutorial we will see the instructions that will allow us to disassemble and replace the interior lights of the Fiat Tipo. First of all,…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos