Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the interior lights of the Fiat Tipo

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Interior dome light bulb

In this video tutorial we will see the instructions that will allow us to disassemble and replace the interior lights of the Fiat Tipo. First of all, we get into the car and start disassembling and removing the interior light fixture, levering on the sides and disconnecting the electrical connector; then we replace the bulbs if necessary, as shown in the video. At this point, we replace in the same way, if necessary, the other ceiling lights and the bulb of the glove compartment (of the right type and with the same attachment), following the video tutorial until the end!

Posted on 6 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Interior Light Bulb in the Fiat Tipo?
How to Replace the Interior Light Bulb in the Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) To replace the interior light bulb in the Fiat Tipo, detach the ceiling light located inside the cabin, above the rear seats. Once the ceiling light …
Where is the cabin air filter of the Fiat Tipo located?
Where is the cabin air filter of the Fiat Tipo located?
Fiat Tipo (2016-2026 / 356, 357, 358) The cabin air filter on a Fiat Tipo vehicle is located inside the cabin, right behind the passenger side glove compartment. To replace the filter, if…
Replacement of the gear lever boot of the Fiat Tipo 356
Replacement of the gear lever boot of the Fiat Tipo 356
Fiat Tipo (2016-2026 / 356, 357, 358) The gear lever knob cover of the Fiat Tipo can deteriorate over time and wear and may require replacement. To do this, place yourself in the driver's…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos