Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper from a Fiat 500 Abarth

Model: Fiat 500 312 - Years 2007-2024
Part: Rear bumper

The procedure to remove the rear bumper from a Fiat 500 Abarth is straightforward but requires lifting the rear of the vehicle to access all the fixing points. You must also remove the rear wheels. The bumper is secured at various points on both sides: in the wheel arch area, there are two screws plus one hidden positioned at the top; two under the bumper, two at the top near the boot, and two expansion clips. The same applies symmetrically on the other side. After removing all the fixings, the bumper is only held by the side clips: pull firmly outward from the car to release it, then disconnect the electrical connectors. If there are any rusted screws, it is better to drill them out than risk tearing the supports.

Posted on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Removing the Front Bumper on Abarth 595 - Fiat 500
Instructions for Removing the Front Bumper on Abarth 595 - Fiat 500
Fiat 500 (2014-2022 / 500 X) In today's video, you will see the main instructions on how to remove the front bumper from an Abarth 595 and Fiat 500. First, start by unscrewing al…
Removing Rear Light on a Fiat 500 Abarth
Removing Rear Light on a Fiat 500 Abarth
Fiat 500 (2012-2023 / 500 L) How to remove the rear light on a Fiat 500 Abarth? Here’s how to disassemble the light. Lift the tailgate, unscrew the securing screws on the side of…
How to Remove the Front Bumper of the Fiat 500 Abarth
How to Remove the Front Bumper of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Today, we will see the instructions that will allow us to remove and replace the front bumper of the Fiat 500 Abarth. First, open the engine bonnet o…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos