Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper of a Fiat 500?

Model: Fiat 500 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Rear bumper

See other generations:
Video tutorial

To remove the rear bumper of a Fiat 500, open the tailgate to access the screws next to the rear lights. These can now be removed by unscrewing the fixing screws and disconnecting the connectors located at their rear; in the light housing, you will find the screws that secure the bumper from the top, which must also be loosened.

By unscrewing the screws located inside the wheel arches and at the central lower part, the bumper can be completely removed and replaced with a new one.


Updated on 11 August 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper in a Fiat 500L
How to Remove the Rear Bumper in a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Before you start, open the boot of your Fiat 500L. Begin by unscrewing and removing the screws that secure the rear bumper to the chassis, located ar…
Removing the Rear Bumper from the Fiat 500 X
Removing the Rear Bumper from the Fiat 500 X
Fiat 500 (2014-2022 / 500 X) In today's tutorial, you will learn how to remove and replace the rear bumper of the Fiat 500 X 4x4, following the instructions below. First, open th…
How to Remove the Rear Bumper from a Fiat 500
How to Remove the Rear Bumper from a Fiat 500
Fiat 500 (2007-2021 / ) To remove the rear bumper from a Fiat 500, open the tailgate to access the screws located at the top of the bumper. Next, unscrew the screws next to …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos