Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear bumper of the Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Rear bumper

In the following mini-guide dedicated to your Fiat 500, we will discover the steps you need to take to safely and quickly remove the entire rear bumper of the car. First of all, reach the back of the car and lift the hood, then proceed with the removal of both rear lights. Once the two rear lights have been removed, unscrew all the various safety hooks located along the entire perimeter of the bumper and once removed, you can finally remove the bumper. Be careful not to damage it by pulling it too hard and proceed gradually.

Posted on 27 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper in a Fiat 500L
How to Remove the Rear Bumper in a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Before you start, open the boot of your Fiat 500L. Begin by unscrewing and removing the screws that secure the rear bumper to the chassis, located ar…
Removing the Rear Bumper from the Fiat 500 X
Removing the Rear Bumper from the Fiat 500 X
Fiat 500 (2014-2022 / 500 X) In today's tutorial, you will learn how to remove and replace the rear bumper of the Fiat 500 X 4x4, following the instructions below. First, open th…
Removing the Plastics from the Bumper of the Fiat 500
Removing the Plastics from the Bumper of the Fiat 500
Fiat 500 (2007-2021 / 312) How to remove the front bumper of the Fiat 500 to replace it or to take off the parts. Lift the bonnet and secure it, raise the car on a jack to acce…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos