Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Rear Bumper from a Fiat 500

Model: Fiat 500 - Years 2007-2021
Part: Rear bumper

To remove the rear bumper from a Fiat 500, open the tailgate to access the screws located at the top of the bumper. Next, unscrew the screws next to the lights, allowing you to remove the lights from their housing by loosening the screws that are now accessible. Finally, detach the rivets located inside the two rear wheel arches: this will allow the bumper to be removed, and by disconnecting the connectors inside, the bumper can be completely taken off.

Updated on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2012-2023 / 500 L) Before you start, open the boot of your Fiat 500L. Begin by unscrewing and removing the screws that secure the rear bumper to the chassis, located ar…
Fiat 500 (2014-2022 / 500 X) In today's tutorial, you will learn how to remove and replace the rear bumper of the Fiat 500 X 4x4, following the instructions below. First, open th…
Fiat 500 (2007-2024 / 312) How do you fit the rear bumper on a Fiat 500? Let’s see how to proceed; this operation is not too complex. First: take the bumper and position it per…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos