Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the wheel on a Fiat 500

Model: Fiat 500 - Years 2007-2024
Part: Wheel

Today, we will explain how to replace the wheel with the spare wheel on a Fiat 500. Changing the wheel is a simple and quick operation that can be done independently. First, open the driver's door and move the driver's seat forward to access the kit used for the wheel replacement. Position the jack between the rear wheel and the rear door. Before lifting the vehicle using a hex key, loosen the wheel nuts; when the nuts are loose, lift the vehicle. Completely remove the nuts and detach the wheel. Insert the emergency spare wheel, tighten the nuts, and lower the vehicle. On Fiat 500 vehicles equipped with a spare wheel, the spare is located inside the boot, specifically under a cover. To remove it, insert the hex key into the lock, turn it counterclockwise, and release the wheel, which will fall to the ground from the underside of the vehicle.

Posted on 26 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Wheel with the Spare on a Fiat 500
How to Replace the Wheel with the Spare on a Fiat 500
Fiat 500 (2007-2024 / 312) Today's instructions will show you how to remove and replace the wheel with the spare on a Fiat 500, in simple and quick steps. First, take the spare…
Replacing a Wheel on a Fiat 500X
Replacing a Wheel on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) In this video tutorial, you will see instructions on how to remove and replace a wheel, for example in case of a puncture, on a Fiat 500X. First, tak…
How to Replace the Spare Wheel on a Fiat 500L
How to Replace the Spare Wheel on a Fiat 500L
Fiat 500 (2012-2023 / 500 L) In this brief video, you will see the instructions for removing and replacing the punctured wheel with the spare wheel on a Fiat 500L. First, open th…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos