Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Rear Seats in the Abarth 500

Model: Fiat 500 312 - Years 2007-2024
Part: Seat

In this tutorial, you will see how to remove the rear seats in the Abarth 500, a very simple and quick operation. First, open both doors and the tailgate of the boot, then locate the two bolts underneath the seat, unscrew them, and separate the seat from the base. Next, unscrew the bolt from the central rear hinge, then proceed to unscrew both bolts on the sides of the backrests and remove them from the cabin. To install any replacements, simply follow the reverse procedure.

Posted on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2007-2021 / ) In this video tutorial, follow the main steps to remove the rear seats of the Fiat 500 Abarth, as outlined below. First, open the boot and start by r…
Fiat 500 (2007-2024 / 312) Today we will see the instructions that will allow us to disassemble and replace the rear seats of the Fiat 500 Abarth, following these simple steps.…
Fiat 500 (2007-2024 / 312) Today's instructions will show us how to lower the backrests of the rear seats of the Fiat 500. First, we open the rear hatch of the trunk and start …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos