Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear seats of the Fiat 500 Abarth

Model: Fiat 500 312 - Years 2007-2024
Part: Seat

Today we will see the instructions that will allow us to disassemble and replace the rear seats of the Fiat 500 Abarth, following these simple steps. First, we open the rear hatch of the trunk and start removing the shelf and reclining the backrests; then we unscrew the fixing screws located at the base of the backrest to remove it, using a socket wrench with an extension, as shown in the video. At this point, we lift the rear bench to remove it as well, removing it from the cabin; all that's left is to replace them if necessary with new ones, reassembling everything!

Posted on 29 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Guide to removing the seat cable of the Fiat 500 Abarth
Guide to removing the seat cable of the Fiat 500 Abarth
Fiat 500 (2007-2021 / 312) In this brief guide, we will see the main steps to help you remove and replace the seat folding cable of the Fiat 500 Abarth. First, open the front d…
How to Replace the Rear Lights on the Fiat 500 Abarth
How to Replace the Rear Lights on the Fiat 500 Abarth
Fiat 500 (2007-2021 / 312) In this video tutorial, you will see how to remove and replace the original rear lights with those from the facelift version on the Fiat 500, includi…
How to Remove the Rear Seats in the Abarth 500
How to Remove the Rear Seats in the Abarth 500
Fiat 500 (2007-2024 / 312) In this tutorial, you will see how to remove the rear seats in the Abarth 500, a very simple and quick operation. First, open both doors and the tail…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos