Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to replace the fog light bulb of the Fiat 500 X.

Fiat 500 - Video tutorial

Model: Fiat 500 500 X - Years 2014-2022
Part: Fog lights
Operation: How to replace the fog light bulb of the Fiat 500 X.

Replacing the fog light bulb of the Fiat 500 X is a very simple operation, easily achievable independently. With the help of our very short video tutorial, we will explain how to perform this operation. Start by removing the wheel arch on the side of the bulb you want to replace, to do this you will first need to remove the plastic screws that hold it in place. Once the wheel arch is removed, gently remove the connector and the bulb. Then remove the bulb and insert the new one, reinsert the connector into the housing and reassemble the wheel arch, closing it with the screws.


Posted on 5 May 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2022 - Where is the fog light button located on the Fiat 500? Read Answer
    • 500 2012-2023 - How do the front fog lights come on in the Fiat 500? Read Answer
    • 500 2007-2022 - Where are the fog lights on the FIAT 500? Read Answer
    • 500 2007-2022 - Where are the fog lights on the new Fiat 500? Read Answer
    • 500 2012-2023 - Where are the fog lights located in the Fiat 500L? Read Answer
    • 500 2007-2023 - How do the fog lights come on in the Fiat 500? Read Answer
    • 500 2007-2023 - How do the fog lights come on in the Fiat 500? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos