Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front fog light bulb of the Fiat 500 Abarth

Model: Fiat 500 312 - Years 2007-2024
Part: Fog lights

In this short guide, we will see the instructions that will allow us to disassemble and replace the front fog light bulb of the Fiat 500 Abarth. First of all, let's move to the front and start by disconnecting the electrical connector of the light; for convenience, in the video, the front bumper has been removed to have better access, as shown in the video. At this point, remove the bulb from the fog light from the bulb holder and replace it with the new one, of the correct type and with the same attachment; then reassemble the bulb holder and make the electrical connection.

Posted on 26 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Fog Light Bulb on Fiat 500 Abarth
Replacing the Fog Light Bulb on Fiat 500 Abarth
Fiat 500 (2007-2021 / 312) In today's tutorial video, you will see how to remove and replace the front fog light bulb on a Fiat 500 Abarth. First, remove the plastic protective…
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Replacing a front headlight bulb on a Fiat 500 Abarth follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. T…
How to Replace the Front Headlight Bulb of a Fiat 500 Abarth
How to Replace the Front Headlight Bulb of a Fiat 500 Abarth
Fiat 500 (2007-2021 / 312) Before you start, open the front bonnet of your Fiat 500 Abarth. Next, unscrew and remove the rear cover of the blown bulb. Then, rotate the base of …

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos