Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fog Light Bulb on Fiat 500 Abarth

Model: Fiat 500 312 - Years 2007-2021
Part: Light bulb

In today's tutorial video, you will see how to remove and replace the front fog light bulb on a Fiat 500 Abarth. First, remove the plastic protective cover located under the bumper by unscrewing all the fixing screws; then unscrew the upper screws of the bumper and those found on both sides of the wheel arches. At this point, detach the bumper to access the fog light bulbs; disconnect the electrical connector and remove the bulb, replacing it with the new one of the correct type.

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Replacing a front headlight bulb on a Fiat 500 Abarth follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. T…
Replacement of the front fog light bulb of the Fiat 500 Abarth
Replacement of the front fog light bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) In this short guide, we will see the instructions that will allow us to disassemble and replace the front fog light bulb of the Fiat 500 Abarth. Firs…
In today's tutorial video, see how to remove and replace, in simple and quick steps, the front headlight bulb on the Fiat 500, including the Abarth version. First, open the bonnet of your car and start by removing the protection cap of the bulbs, located
In today's tutorial video, see how to remove and replace, in simple and quick steps, the front headlight bulb on the Fiat 500, including the Abarth version. First, open the bonnet of your car and start by removing the protection cap of the bulbs, located
Fiat 500 (2007-2021 / 312) …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos