Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to replace the front headlight bulb of the Fiat 500 Abarth.

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2023
Part: Headlight bulb
Operation: How to replace the front headlight bulb of the Fiat 500 Abarth.

The replacement of a front headlight bulb on a Fiat 500 Abarth vehicle follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. To perform the replacement, we must: -open the front hood; -unscrew the two fixing pins of the right front headlight; -disconnect the connector from the headlight; -open the light fixture and remove the bulb; -insert the new bulb; -connect the connector; -insert and secure the headlight; Once finished with the right headlight, you can proceed to replace the bulb of the left headlight if necessary.


Posted on 17 January 2024 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2021 - Where are the front fog lights of the Fiat 500 mounted? Read Answer
    • 500 2012-2023 - Which dipped beam bulbs are fitted on the Fiat 500L? Read Answer
    • 500 2007-2022 - Why are the daytime running lights of the Fiat 500 not working? Read Answer
    • 500 2007-2021 - The position lights of my Fiat 500 are not working, what can I do? Read Answer
    • 500 1957-1975 - How to replace the headlight bulb in the vintage Fiat 500L? Read Answer
    • 500 1957-1975 - How to replace the headlight bulb on a Fiat 500? Read Answer
    • 500 2012-2023 - How to replace the parking light on a Fiat 500X? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos