Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb of a Fiat 500 Abarth

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

Before you start, open the front bonnet of your Fiat 500 Abarth. Next, unscrew and remove the rear cover of the blown bulb.

Then, rotate the base of the blown bulb counter-clockwise by 90 degrees and pull it out of its housing. At this point, disconnect the electrical connector.

Once you have disconnected the power connector, you can remove the bulb, completing the disassembly. To fit the new bulb, follow these instructions in reverse, and the replacement will be finished.


Updated on 22 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Replacing a front headlight bulb on a Fiat 500 Abarth follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. T…
In today's tutorial video, see how to remove and replace, in simple and quick steps, the front headlight bulb on the Fiat 500, including the Abarth version. First, open the bonnet of your car and start by removing the protection cap of the bulbs, located
In today's tutorial video, see how to remove and replace, in simple and quick steps, the front headlight bulb on the Fiat 500, including the Abarth version. First, open the bonnet of your car and start by removing the protection cap of the bulbs, located
Fiat 500 (2007-2021 / 312) …
How to replace the front headlight bulb on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) If you want to replace the front headlight bulb on your Fiat 500X yourself, carefully read the following instructions and put them into practice. Bef…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos