Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulb on a Fiat 500X

Model: Fiat 500 500 X - Years 2014-2022
Part: Headlight bulb

If you want to replace the front headlight bulb on your Fiat 500X yourself, carefully read the following instructions and put them into practice. Before starting, ensure that the car is turned off, then unlock the bonnet using the designated button and lift it fully. At this point, position the safety arm correctly and proceed to remove the protective cover located at the rear of the headlight. Finally, remove the faulty bulb and replace it with a new one. Refit the protective cover and you are done.

Updated on 27 August 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Front Headlight Bulb on a Fiat 500X
How to Replace the Front Headlight Bulb on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) In this guide, we will provide instructions for removing and replacing the daytime running or position bulb of the front headlight on a Fiat 500X. To…
How to replace the front headlight bulbs in the Fiat 500X?
How to replace the front headlight bulbs in the Fiat 500X?
Fiat 500 (2014-2022 / 500 X) In this tutorial we can see how to replace the front headlight bulbs in the Fiat 500X, an extremely simple and quick operation. First of all, make su…
How to Replace the Front Headlight Bulbs on a Fiat 500X
How to Replace the Front Headlight Bulbs on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) Learn how to replace the front headlight bulbs on a Fiat 500X. Begin by removing the plastic cover at the bottom of the bumper with an appropriate sc…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos