Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How do you replace the fog light bulb on a Fiat 500?

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2023
Part: Fog lights
Operation: How do you replace the fog light bulb on a Fiat 500?

In order to replace the fog light bulb of the Fiat 500, you need to loosen the screws and remove the rivets that secure the inner cover of the wheel arch, so that you can access the inside of the fog light. Here, you will need to disconnect the connector and remove the corresponding bulb. This can now be replaced with a new replacement part, which must be connected to the connector and inserted into the corresponding headlight; after replacement, it will be possible to reposition the appropriate wheel arch, checking that everything works.


Posted on 14 June 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2022 - Where is the fog light button located on the Fiat 500? Read Answer
    • 500 2012-2023 - How do the front fog lights come on in the Fiat 500? Read Answer
    • 500 2007-2022 - Where are the fog lights on the FIAT 500? Read Answer
    • 500 2007-2022 - Where are the fog lights on the new Fiat 500? Read Answer
    • 500 2012-2023 - Where are the fog lights located in the Fiat 500L? Read Answer
    • 500 2007-2023 - How do the fog lights come on in the Fiat 500? Read Answer
    • 500 2007-2023 - How do the fog lights come on in the Fiat 500? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos