|
Do it yourself
| |||
| ||||
|
Video tutorial
Hoping to never need it, it is good to know how to temporarily repair the tire of our Fiat 500 in case of a puncture, using the inflation kit provided, which is located under the trunk floor. Position the car - which must be in neutral, turned off, and with the handbrake engaged - so that the valve of the tire to be inflated is close to the ground. Take the kit and rotate the knob to the "sealing" position; unroll the hose and screw the fitting onto the valve stem, and attach the power cable to the vehicle's power outlet. Start the engine at idle and press the ignition button on the kit, which will start the sealant entering the tire, then the pump will start to inflate the tire: make sure it reaches the correct pressure. If this is not achieved within 15 minutes, it means that the tire is too damaged for the system, and it must be replaced. Once it has reached the correct pressure, turn off the pump, remove the speed limit sticker and apply it to the dashboard, then remove all the equipment. Drive for 10 minutes at no more than 90 km/h, then check the tire pressure again and if it has dropped, inflate it again. Go to a tire repair shop as soon as possible for a permanent repair, informing the professional that the tire has been treated with sealant.
Posted on 9 October 2025 by ScegliAuto
Related tutorials
Fiat 500
(2014-2022 /
500 X)
In this video, you will see how to repair a flat tyre on a Fiat 500X: the tyre repair kit can get you home quickly and safely. It is located in the b…
Fiat 500
(2014-2022 /
500 X)
Here’s how to correctly use the tyre repair kit on a Fiat 500x: The maintenance kit is located under the rear load floor. If you have a flat tyre, st…
Fiat 500
(2012-2023 /
500 L)
In today's video, you will learn how to repair one or more tyres on the Fiat 500L using the appropriate inflator and repair kit. First, position the …
Other guides you may be interested in
|
How to Open the Bonnet of the Renault Kangoo
In this video, see how to open the bonnet of a Renault Kangoo and locate the windscreen washer fluid reservoir. The YouTuber had to go to a local garage to achieve this. He mentions going towards the passenger door, as this is a right-hand drive vehicle. Naturally, for left-hand drive vehicles, the door is that of the driver. Pull the lever located on the side towards you to release the bonnet. To open it, lever from the centre of the bonnet outwards, which is somewhat the opposite of how most bonnets open. In front of the driver, on the grille, there is a black rubber cap. Here you can add the washer fluid. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.036
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |