Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Adjustment of the tappets on vintage Fiat 500 cars

Model: Fiat 500 Epoca - Years 1957-1975
Part: Valve

In this video we can see how to adjust the tappets of a vintage Fiat 500. The desired adjustment is 0.15 for the intake valves, which is the second one, and 0.20 for the exhaust valve, which is the first one we see: for the second cylinder, we first see the intake valve and then the exhaust valve. The adjustment is done with the two screws located in front. We turn the engine with a 17 key until we bring the second cylinder into phase (closing the exhaust valve and opening the intake valve): this way we can make the adjustment. We will need a feeler gauge with which we will check the play of our tappet, passing the blade with the right thickness under the tappet and then tightening.

Posted on 25 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Idle Speed of the Classic Fiat 500
How to Adjust the Idle Speed of the Classic Fiat 500
Fiat 500 (2007-2024 / 312) Today's guide shows you the steps to adjust the idle speed of the classic Fiat 500. First, open the bonnet and locate the throttle cable adjuster at …
How to Activate Uconnect on a Fiat 500
How to Activate Uconnect on a Fiat 500
Fiat 500 (2020-2026 / 500 E, 332) Today, you will learn how to activate Uconnect on a Fiat 500 vehicle. The steps to follow are very simple. First, install the Fiat app on your smartp…
How to Adjust or Replace the Gear Cable on the Fiat 500
How to Adjust or Replace the Gear Cable on the Fiat 500
Fiat 500 (2007-2024 / 312) This guide briefly outlines the instructions to adjust or replace the gear cable on the Fiat 500. First, open the vehicle's bonnet and locate the cab…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos