Do it yourself
Frequently asked questions about cars and motorcycles

Valve and rocker arm adjustment on Fiat 500 - 126

Model: Fiat 500 Epoca - Years 1957-1975
Part: Checks and maintenance

In this video tutorial, you will learn how to adjust the valves and rocker arms on a Fiat 500 or 126, which have the same engine. First, access the cylinder head after removing its cover; then, position the pistons at top dead centre. At this point, adjust the rocker arms of the first cylinder, and then rotate the engine to the right (turning the pulley) to adjust the second cylinder. Use a feeler gauge between the valves and rocker arm to check the correct values as indicated in the manual: follow the video to the end!

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (1957-1975 / Epoca) In this video we can see how to adjust the tappets of a vintage Fiat 500. The desired adjustment is 0.15 for the intake valves, which is the second o…
Fiat 500 (2012-2023 / 500 L) In this video tutorial, you will see the main instructions for removing and replacing the rocker cover gasket on the Fiat 500L 1.4 T-Jet. First, open…
Fiat 500 (1957-1975 / Epoca) .. 500. This tutorial also applies to the later Fiat 126, which also has a rear engine. First, remember to work only when the engine is cold to avoid potential.. …

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2022 - What does the parking assistance not available on the Fiat 500 mean? Read answer
    • 500 2007-2022 - Why does the trunk of the Fiat 500C not open? Read answer
    • 500 2007-2022 - How much does the panoramic roof cost in the Fiat 500? Read answer
    • 500 2007-2024 - Why is the USB port of the Fiat 500 not working? Read answer
    • 500 2007-2024 - What does the message "Start & Stop not available" mean in the Fiat 500? Read answer
    • 500 2014-2022 - In what position is the passenger compartment filter on the Fiat 500x? Read answer
    • 500 2012-2023 - What does "Anomaly P2930" mean on a Fiat 500L? Read answer
    • 500 2007-2024 - Why does the Fiat 500 Start & Stop not work? Read answer
    • 500 2014-2022 - What does the wording "Service expired" on the Fiat 500X mean? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos