Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the EGR valve of the Fiat 500L?

Model: Fiat 500 500 L - Years 2012-2023
Part: Valve

It will be possible to replace the EGR valve of the Fiat 500L by opening the hood to gain access to the components inside the engine compartment: the valve can be located at the rear of the engine block, just below the exhaust manifold. You will need to loosen the screws that secure it in place and disconnect the connectors attached to it: at this point, you will be able to completely remove it from its seat in order to insert the new one. The new valve can now be installed to ensure that everything functions correctly.

Posted on 16 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Conditioning Compressor in the Fiat 500L
How to Replace the Air Conditioning Compressor in the Fiat 500L
Fiat 500 (2012-2023 / 500 L) In this tutorial, you will see how to replace the air conditioning compressor in the Fiat 500L, a straightforward operation that requires good manual…
How to Access the Internal Menu of a Fiat 500L
How to Access the Internal Menu of a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Before starting, sit in the driver's seat of your Fiat 500L. Begin by activating the onboard computer (stereo) by pressing the power button. Next, pr…
Where is the OBD port of the Fiat 500L located?
Where is the OBD port of the Fiat 500L located?
Fiat 500 (2012-2023 / 500 L) If you want to analyze one or more errors detected by the control unit of your Fiat 500L, then you must necessarily know the exact location where the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos