Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

A problem with the manifold and EGR valve of a Fiat 500 1.3 MultiJet.

Model: Fiat 500 312 - Years 2007-2024
Part: EGR valve

In this video we see how a Fiat 500 1.3 MultiJet had a big problem, it was jerking and giving off white smoke even though there were no errors in the engine control unit. The problem was the intake manifold completely full, clogged with soot, as well as the EGR valve, which could no longer work properly and therefore everything else became clogged. The YouTuber also shows us the absolute pressure sensor, with the central hole completely blocked. Therefore, the necessary air for perfect combustion does not arrive, then the sensor is completely clogged, and communicates false data to the engine control unit. As a result, there will be excessive fuel consumption, so it would be a good idea to periodically clean the intake manifolds.

Posted on 13 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Injectors of the Fiat 500 1.3 Multijet
How to Change the Injectors of the Fiat 500 1.3 Multijet
Fiat 500 (2007-2022 / 312) Today, we will see in this tutorial how to dismantle and replace the diesel injectors of the Fiat 500 1.3 Multijet. First, open the engine bonnet and…
Replacing the Glow Plugs on a Fiat 500L 1.3 Multijet
Replacing the Glow Plugs on a Fiat 500L 1.3 Multijet
Fiat 500 (2012-2023 / 500 L) In this brief guide, find the instructions to remove and replace the glow plugs on the Fiat 500L with a 1.3 Multijet engine. First, open the bonnet o…
How do you replace the EGR valve of the Fiat 500L?
How do you replace the EGR valve of the Fiat 500L?
Fiat 500 (2012-2023 / 500 L) It will be possible to replace the EGR valve of the Fiat 500L by opening the hood to gain access to the components inside the engine compartment: the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos