Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to change the glow plugs on the Fiat 500 L 1.3 Multijet

Fiat 500 - Video tutorial

Model: Fiat 500 500 L - Years 2012-2023
Part: Glow plugs
Operation: How to change the glow plugs on the Fiat 500 L 1.3 Multijet

Let's find out in this guide the main instructions that will allow us to disassemble and replace the glow plugs of the Fiat 500 L 1.3 Multijet. First of all we open the bonnet and start by removing the intake sleeve, unscrewing the clamp screw; after which we remove the metal bulkhead that we find above the turbine, in order to be able to access our glow plugs. At this point we disconnect the connectors or pipettes that we find on the glow plugs; we use a socket wrench with extension to remove them and replace them with new ones!


Posted on 29 September 2022 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2022 - What is the cost for replacing the Fiat 500 1.3 multijet glow plugs? Read Answer
    • 500 2014-2022 - How much does it cost to replace the glow plugs in the Fiat 500X 1.3 MultiJet? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos