Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to replace the spark plugs on a Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 Epoca - Years 1957-1975
Part: Spark plugs
Operation: How to replace the spark plugs on a Fiat 500

Before starting, we will have to go to open the rear engine hood of our Fiat 500. So let's start by disengaging, disconnecting and moving the two pins connected to the spark plugs. After that, we will have to unscrew and extract the spark plugs from their housing located in the head of the engine. Once we have extracted the spark plugs from the cylinder head of our Fiat 500, we can go and remove them, and we will have correctly completed the relative disassembly. To fit the new spark plugs, all we have to do is follow this procedure in reverse, and the replacement will be completed.


Posted on 28 February 2024 by ScegliAuto

    Frequently Asked Questions

    • 500 2012-2023 - How do you replace the spark plugs of the Fiat 500L? Read Answer
    • 500 2007-2022 - How much does it cost to replace the Fiat 500 spark plugs? Read Answer
    • 500 2007-2021 - Where are the spark plugs of the Fiat 500 1.3 MultiJet located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos