Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How do you replace the spark plugs on the Fiat 500?

Fiat 500 - Video tutorial

Model: Fiat 500 - Years 2007-2021
Part: Spark plugs
Operation: How do you replace the spark plugs on the Fiat 500?

To replace the spark plugs of the Fiat 500 you need to lift the hood by accessing the engine compartment and disconnect all the pipes that are connected to the engine, so that its top cover can be removed after loosening the bolts. When the cover has been removed, you can disconnect all the connectors that prevent access to the spark plugs. In this way, these can be extracted from their housings using a special key. Once the old spark plugs have been removed, it will be possible to replace them with new spare parts which must be properly installed.


Posted on 30 May 2022 by ScegliAuto

    Frequently Asked Questions

    • 500 2012-2023 - How do you replace the spark plugs of the Fiat 500L? Read Answer
    • 500 2007-2022 - How much does it cost to replace the Fiat 500 spark plugs? Read Answer
    • 500 2007-2021 - Where are the spark plugs of the Fiat 500 1.3 MultiJet located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos