Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the spark plugs of the Fiat 500 1.2

Model: Fiat 500 312 - Years 2007-2024
Part: Spark plugs

Today we will discover the main instructions on how to remove and replace the spark plugs of the Fiat 500 1.2. First, open the engine bonnet of the vehicle and start by removing the air filter box, disconnecting the intake hose. Then disconnect the connectors of the coils, using a socket wrench with an extension to remove them, as shown in the video. At this point, install the new spark plugs of the correct type and with the same thread pitch; screw them in by hand and then tighten gently with a wrench, reconnecting them and starting the engine!

Posted on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plugs on a Fiat 500
How to Replace the Spark Plugs on a Fiat 500
Fiat 500 (1957-1975 / Epoca) Before starting, open the rear engine cover of your Fiat 500. Begin by disconnecting and moving the two connectors attached to the spark plugs. Next,…
How to Replace the Spark Plugs of the Fiat 500?
How to Replace the Spark Plugs of the Fiat 500?
Fiat 500 (2007-2021 / ) To replace the spark plugs of the Fiat 500, lift the bonnet to access the engine bay and disconnect all the hoses connected to the engine so that the…
How to Replace the Spark Plugs on a Fiat 500 Abarth
How to Replace the Spark Plugs on a Fiat 500 Abarth
Fiat 500 (2007-2022 / 312) To replace the spark plugs on a Fiat 500 Abarth, open the bonnet and unscrew the screws securing the plastic cover on top of the engine block. Undern…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos