|
Do it yourself
| |||
| ||||
How to Replace the Spark Plugs on a Fiat 595 Abarth
Model: Fiat 500
312
- Years:
2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Video tutorial
To replace the spark plugs on a Fiat 595 Abarth, first remove the intake housing by unscrewing the 10 mm bolt, unclipping the clips, lifting the housing, and extracting the filter. Blow away dust and debris to prevent dirt from falling into the engine, then disconnect the electrical connectors of the 4 coils; unscrew the retention bolt of the rail to move the wiring harness back (this makes the job much easier); loosen the nut that secures each coil and remove them. Insert a 16 mm socket into the spark plug well, loosen the spark plug, and then unscrew it by hand. Meanwhile, obtain 4 NGK Iridium spark plugs from Amazon with code B0019I33FQ at £12.24 each, with free delivery for Prime customers. Gently insert the new spark plug into the socket, screwing it in by hand, then give it half a turn with the socket. Now, refit the coil into its seat, tighten the 10 mm nut, reconnect the electrical connector, and repeat for the other three spark plugs. Reassemble the filter housing, lubricating the mounting points with silicone grease; press the housing down, re-screw the bolt, reconnect the clips, and you're done.
Posted on 10 April 2026 by ScegliAuto
Related tutorials
Fiat 500
(2007-2022 /
312)
To replace the spark plugs on a Fiat 500 Abarth, open the bonnet and unscrew the screws securing the plastic cover on top of the engine block. Undern…
Fiat 500
(2007-2024 /
312)
In this video, see how to check the countdown for servicing on a Fiat Abarth 595 with a digital instrument cluster. On the left side of the dashboard…
Fiat 500
(2020-2026 /
500 E, 332)
Over time and with use, the remote control cover of a Fiat 595 Abarth can become filled with unsightly scratches, compromising its appearance. By sea…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.053
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |