Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Air filter

Today, we will explain how to independently replace the air filter on a Fiat 500. The filter is installed inside the engine bay directly above the engine within a box. To replace it, open the front bonnet by pulling the release lever located under the driver's dashboard. After opening the bonnet, remove the cover of the box using an Allen key. Open the box cover and remove the worn filter before inserting the new filter inside. Clean with a microfiber cloth. Insert the new filter and close the box cover by tightening the nut using the previously used key. In some models of the Fiat 500, it may be necessary to disconnect the air duct and the connector related to electronic operation before removing the box cover.

Posted on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Air Filter on the Fiat 500 L - 500 X
Replacing the Air Filter on the Fiat 500 L - 500 X
Fiat 500 (2012-2023 / 500 L) In this tutorial, learn how to remove and replace the engine air filter on the Fiat 500 L 1.3 MultiJet and the 500 X. First, open the bonnet and remo…
Replacing the Engine Air Filter in the Fiat 500 X 1.3 MultiJet
Replacing the Engine Air Filter in the Fiat 500 X 1.3 MultiJet
Fiat 500 (2014-2022 / 500 X) In this brief and simple guide, learn how to remove and replace the engine air filter in the Fiat 500 X with a 1.3 MultiJet engine. First, open the b…
How to replace the air filter of the Fiat 500 L
How to replace the air filter of the Fiat 500 L
Fiat 500 (2012-2023 / 500 L) With the help of this video tutorial, we will explain how to replace the air filter on the Fiat 500 L. We begin the replacement by opening the front …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos