Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Air Filter in a Fiat 500L

Model: Fiat 500 500 L - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Air filter

See other generations:
Video tutorial

To change the engine air filter in a Fiat 500L, open the bonnet and locate the filter box in the engine compartment. Disconnect, if necessary, the hoses or connectors attached to the cover, then unscrew the fixing screws using a 7 mm socket.

Lift the cover of the box and remove the old filter from its seat. Clean the inside of the housing, removing any dust and dirt, then insert the new filter element in the correct position, ensuring it fits snugly against the edges of the seat.

Reposition the cover, ensuring it is correctly seated, and tighten all the fixing screws. Finally, reconnect any hoses and connectors that were removed and close the bonnet.

The arrangement may vary slightly depending on the engine type.


Posted on 25 September 2026 by ScegliAuto


Related tutorials

Changing the Number Plate Light on a Fiat 500L
Changing the Number Plate Light on a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Today, change the number plate lights on a Fiat 500L. First, obtain a suitable screwdriver or, as shown in the video description, a battery-powered s…
How to Disable the Airbag of a Fiat 500L
How to Disable the Airbag of a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Before starting, sit in the driver's seat of your Fiat 500L. First, activate the instrument cluster of your car. Next, press the "SET" button, then s…
How to Remove the Rear Bumper in a Fiat 500L
How to Remove the Rear Bumper in a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Before you start, open the boot of your Fiat 500L. Begin by unscrewing and removing the screws that secure the rear bumper to the chassis, located ar…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos