Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Changing the Number Plate Light on a Fiat 500L

Model: Fiat 500 500 L - Years 2012-2023
Part: Light bulb

Today, change the number plate lights on a Fiat 500L. First, obtain a suitable screwdriver or, as shown in the video description, a battery-powered screwdriver to remove the screws securing the number plate holder. After removing the holder, use a plastic lever and carefully insert it to push down, releasing the bulb holder from its housing. Finally, disconnect the wiring to access the bulb, rotate it, and pull it out of the holder. Once you have replaced the bulb with your chosen one, reverse the steps to reassemble all parts, completing your task.

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Number Plate Bulbs in the Fiat 500L
How to Replace the Number Plate Bulbs in the Fiat 500L
Fiat 500 (2012-2023 / 500 L) In today's video, you will see a very simple maintenance task that you can perform independently. Specifically, how to replace the number plate light…
How to Replace the Number Plate Lights on a Fiat 500
How to Replace the Number Plate Lights on a Fiat 500
Fiat 500 (2007-2021 / 312) In this tutorial, remove the number plate light unit located in the rear bumper of the Fiat 500, 500L, and 500X using a screwdriver (the lens coverin…
Replacing Number Plate Lights on Fiat 500L
Replacing Number Plate Lights on Fiat 500L
Fiat 500 (2012-2023 / 500 L) Today, I will quickly explain how to change the light that illuminates the number plate on a Fiat 500L. Contrary to what many think, it is actually a…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos