Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the daytime running lights of a Fiat 500L

Model: Fiat 500 500 L - Years 2012-2023
Part: Light bulb

In today's video, we can see how to change the daytime running light bulb of a Fiat 500L. So, to change the daytime running light bulb, we first need to remove the front wheel on the side of the vehicle where we need to make the replacement. Then, using a Phillips screwdriver, we unscrew the two screws of the cover located inside the wheel well and remove it. After that, we unscrew the plastic cap of the bulbs and remove the bulb socket of the daytime running light, then remove the bulb to replace it with a new one and reassemble everything following the reverse procedure.

Posted on 4 September 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Daytime Running Lights on a Fiat 500L
How to Replace the Daytime Running Lights on a Fiat 500L
Fiat 500 (2012-2023 / 500 L) In this video, you will learn how to replace the burnt-out bulb of the DRL, or daytime running lights, on Fiat's MPV, the 500L. Start the replacement…
How to Remove the Rear Bumper in a Fiat 500L
How to Remove the Rear Bumper in a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Before you start, open the boot of your Fiat 500L. Begin by unscrewing and removing the screws that secure the rear bumper to the chassis, located ar…
How to set the time on the Fiat 500L
How to set the time on the Fiat 500L
Fiat 500 (2012-2023 / 500 L) In this guide we will see the instructions that will allow us to change the time on the central display of the Fiat 500L. First of all, we get into t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos