Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Daytime Running Light Bulb on a Fiat 500L

Model: Fiat 500 500 L - Years 2012-2023
Part: Headlight bulb

In this very short video tutorial, we will see the entire procedure needed to replace the bulb (W21W 12V) of the daytime running light on our Fiat 500L, produced from 2012 to 2023. To perform the replacement, start by removing the plastic panel located inside the wheel arch, near the back of the headlamp, by unscrewing the two screws holding it in place. Next, remove the plastic cap from the back of the headlamp and turn the bulb holder of the position bulb counterclockwise to extract it. Once done, remove the old bulb and replace it with a new one by following the reverse procedure.

Updated on 22 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the daytime running lights of a Fiat 500L
Fiat 500 (2012-2023 / 500 L) In today's video, we can see how to change the daytime running light bulb of a Fiat 500L. So, to change the daytime running light bulb, we first need…
How to Replace the Daytime Running Lights on a Fiat 500L
How to Replace the Daytime Running Lights on a Fiat 500L
Fiat 500 (2012-2023 / 500 L) In this video, you will learn how to replace the burnt-out bulb of the DRL, or daytime running lights, on Fiat's MPV, the 500L. Start the replacement…
How to Change All the Lights on a Fiat 500L
How to Change All the Lights on a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Replacing the bulbs on the Fiat 500L is very simple; open the bonnet and look inside, remove the cap of the dipped beam. The bulb inside is a push-fi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos