Do it yourself
| ||||
|
Fiat 500 - Video tutorial
Model: Fiat 500
500 L
- Years 2012-2023 Replacing the light bulbs on the fiat 500L is really very simple; we open the hood and look inside, remove the cap from the dipped beam. The bulb inside snaps, there is no spring to remove, just make a small movement and the bulb comes out. With the same simplicity we replace it with the new one, which in this case is LED. Remember that new bulbs must never be touched with bare hands, if we don't want to shorten their life a lot. Since there is the LED bulb, there are two terminals that we must insert, then we close it with its cap. We do the same with daytime running lights and high beams, which are next to it on the right. We remove the flap in the wheel compartment. This too, just pull it and it comes off, then we put the LED bulb in, which you just need to turn to let it in and block it. Still in the wheel compartment, but further down, we come to the fog lights. We have to turn the whole wheel to put our hand in the compartment and extract the bulb, with the usual system. Since they are lights specifically designed for the Fiat 500L, no warning light will come on on the instrument panel. You can find them on Amazon by simply typing "led lights for Fiat 500l".
Posted on 30 November 2022 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHandbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.049
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |